DT-X93HX2

2 x 9" 1920 x 1200 control twin set Monitor

DT-X93Hx2

CAD 4,299.99

For image control in playout or OB van applications, there’s the DT-X93Hx2 – a dual 9” 1920x1200 pixels rack-mounted monitor.

Warranty

Labor: 2 years

Parts : 2 years

Input/Output Interfaces (x2 — 1 for each panel)

2K/3G/HD/SD-SDI input × 2, 2K/3G/HD/SD-SDI loop output × 2, HDMI 1.3 input × 1, HDMI 1.3 loop output × 1,

CVBS input × 1, CVBS loop output × 1, 3.5mm analog audio input × 1, 3.5mm analog audio output × 1,

RJ45 GPI/TALLY/UMD input × 1, USB firmware upgrade × 1

Embedded Audio Monitoring

DT-X93Hx2 supports SDI-2ch, HDMI-2ch embedded audio meters display, and analog-2ch audio meters display, with marks and audio abnormal alert info. The audio meter pattern position can be selected from one of four corners, and scale markers, alert info, and translucent of the audio meter pattern are selectable.

UMD and Text-Tally Display

DT-X93Hx2 supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection, and Max 8 letters displayed. The UMD/TALLY signal inputs via RJ45(RS485) port on the rear panel of the monitor.

Peaking, R/G/B/Mono Only, Zebra, False Color

Timecode, H/V delay, AFD, Scale Markers

GPI Interface and Control

The RJ45(RS485) port on the rear panel supports UMD control and GPI functions setting and control. There are 4 GPI pins and can be assign the following functions, by shorting with GND pin to enable the functions:
Red TALLY, Green TALLY, Yellow TALLY, Aspect Ratio, Scan Mode, Image Flip, Zoom Mode, Mute, Freeze Frame, Color Temperature, Timecode, Zebra Stripes, Vector scope, Audio meters, Histogram, False Color, AFD, H/V Delay, R/G/B/Mono, Scale Markers, Colorbar, UMD, Audio Alarm, Focus Assist

USB Firmware Upgrade

The monitor provides a standard USB port on the rear panel, for firmware upgrade. Users can download the latest firmware file to a USB stick, and directly insert into DT-X93Hx2 monitor to upgrade, without PC connection.

3-color TALLY Light

There are front TALLY lights on top of each screen, with Red, Green and Yellow colors, and users can define the pins of RJ45 port to control the TALLY lights.

Power Supply

DT-X93Hx2 provides a 4-pin XLR socket of DC 6.5-24V power input, for the both 2 screens, and an AC-DC adaptor is attached on the rear panel of the monitor.

Installation

DT-X93Hx2 is standard 19" rack mount fixing, occupies 4U height. The monitor is ±30° up and down rotatable when installed on racks.

9” IPS LCD×2, 1920×1200 pixels
2K / 3G / HD/SD-SDI input and output loop
2 channel embedded audio level indicator with alarm
HDMI inputs
19" 4U rack.mounting with +-30 degree angle option
TSL IMD control / Tally GPI
AFD, timecode, H/V delay
R/G/B/Mono, False color
Zebra stripes, Peaking focus assist
Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1
USB firmware upgrade

Technical Specifications

Panel Specifications

Panel size (diagonal in inch): 9

Panel resolution: 1920 X 1200 Pixels

Panel Aspect Ratio: 16 to 9

Panel Type LCD: Yes

Panel Modulation IPS: Yes

Back-light LED: Yes

Brightness in cd/m²: 400

Panel Bit depth:: 8

Image Processing Bit depth: 8

Viewing angle H/V: H 160 / V 160

Contrast Ratio: 1000:1

IN-OUT´s Connections VIDEO

Input HDSDI: Yes, 3G

Number of HDSDI Inputs: 4

Input HDMI: Yes

Number of HDMI Inputs: 2

Input Composite: Yes

Numbers of Composite Inputs: 2

Loop out HDSDI: Yes, 3G 2 x 2 (for each unit 2 outs)

Loop out HDMI: Yes

Loop out Composite: Yes

IN-OUT connections AUDIO

Audio Line IN: Yes, 2 x 3.5mm mini jack (1 for each unit)

Audio Embedded Channel out: Yes, 3.5mm mini jack

Speaker integrated: Yes, 4

IN-OUT Connections Controls

GPI IN: Yes, RJ45 shared with TSL Serial control

RS485/422 IN: Yes, for TSL

USB Port: Yes, for Service and Updates

Supported Signal Formats

Note for SMPTE/ITU Definitions: SMPTE or ITU definitions have servile specification in-between, like SMPTE 274 for Interlace Frames rates for example, this is not reflecting here! Please ask for details Signal Spec´s and Frame-rate supports

HDSDI/SD Signal Formats 2K: Yes, SMPTE ST 2048-1: 2011 up to 60/50p

HDSDI/SD Signal Formats SMPTE-425M-A/B: Yes

HDSDI/SD Signal Formats SMPTE-274M: Yes

HDSDI/SD Signal Formats SMPTE-RP211: Yes

HDSDI/SD Signal Formats SMPTE-296M: Yes

HDSDI/SD Signal Formats ITU-R BT656: Yes

HDSDI/SD Signal Formats SMPTE-125M: Yes

HDMI Format 1080P plus: up to 1080P

Composite: Yes, PAL/NTSC

Dedicate Functions

SDI Timecode: Yes, LTC, VITC1&2

R/G/B/Mono: Yes

False color: Yes

Zebra stripes display: Yes

Peaking focus assist: Yes

H/V delay: Yes

Scan Modes: Normal/Over scan/Native

Freeze frame: Yes

Safety area markers: Yes, 80%, /85%, 90%, 93%, 95%

Center Marker: Yes

Scale Markers: Yes, 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1

Tally via GPI: Yes

User presets: Yes

TSL UMD/IMD Support via:: Yes, RJ45 serial shared with GPI

Function Keys: 5 x 2

Picture Flip modes: Yes

OPERATION KEY-LOCK: Yes

Dedicate Features

Auto source search: Yes

Measurement and indication Tools

Waveform subs

Vector-scope subs

Histogram subs

Audio Level Meter: Yes

Audio Level Meter Channels: 2

Audio Level Meter subs: Audio abnormal alert info display
Display only 2-ch,

Calibration and Color settings

Preset Color Temperature 9300K: Yes

Preset Color Temperature 6500K: Yes

Preset Color Temperature 5600K: Yes

Preset Color Temperature USER:: Yes

Manual calibration of Color Temperature (gain or/and cut-off): Yes

Gamma Levels: 2.2/2.4/2.6

Adjustable Back-Light: Yes

Power and Enviroment Spec´s

Power AC: Yes, AC/DC adapter

Power DC: Yes, 6.6V - 24V

DC Connector Type:: 4 PIN XLR

Power consumption: DC 36 Watts

Operation Temperature in Celsius: 0C to 40C

Operation Humidity:(Non-Condensing): 10% to 90%

Storage Temperature in Celsius: -15C to 60C

Storage Humidity (Non-Condensing): 10% to 90%

Include Package

AC Power cord: Yes

Others: AC/DC Adapter

Instruction Doc:: Yes

General Editing Note

General Note: Simulated pictures.The values for weight and dimensions are approximate .E.&O.E. Design and specifications subject to change without notice.