DT-V21G2Z

21.5-Inch Broadcast Field/Studio Monitor

DT-V21G2Z

CAD 4,199.99

The DT-V21G2 is a versatile LCD monitor suitable for field, studio and broadcast use. The monitor is fully capable of displaying 2048 x 1080/24p (DCI 2K) signal.

Warranty

Labor: 1 year

Parts : 1 year

21-inch class (21.5-inch view able) IPS panel with 16.7 million color reproduction
High 1500:1 Contrast Ratio
Full HD resolution: 1920 x 1080 pixels
Fully capable of displaying 2048 x 1080/24p (DCI 2K) signal
Built-in Histogram, Waveform, Vector Scope, Zebra
Built-in Audio Level Meter up to 16ch
Lissajous audio metering
3 Gamma Preset Modes
Wide array of markers and indicators
Two 3G-SDI & Dual Link inputs
IMD (in monitor display)
Optimized I-P conversion
Supports the EIA/CEA-708 and EIA/CEA-608 SDI closed captioning standards
Color Temperature settings (9,300K, 6,500K, 5,600K or User mode)
IP modes: Normal, Field, and Cinema (24p)
Pixel-by-pixel (1:1) display
Time code display (SDI)
Built-in stereo speaker
Tiltable stand with 2-way installation capability
Carrying handle

Technical Specifications

Panel Specifications

Panel size (diagonal in inch): 21.5

Panel resolution: 1920 X 1080 Pixels

Panel Aspect Ratio: 16 to 9

Panel Type LCD: Yes

Panel Modulation IPS: Yes

Back-light LED: Yes

Brightness in cd/m²: 300

Panel Bit depth:: 8

Image Processing Bit depth: 10

Panel response times in ms: 8 ms

Viewing angle H/V: H 178 / V 178

Contrast Ratio: 1500:1

IN-OUT´s Connections VIDEO

Input HDSDI: Yes, 3G

Number of HDSDI Inputs: 2

HDSDI DUAL LINK: Yes

Input HDMI: Yes

Number of HDMI Inputs: 1

HDMI HDCP: Yes

Input YUV: Yes, 3 x BNC

Input Composite: Yes

Numbers of Composite Inputs: 2

Loop out HDSDI: Yes, 2 with bridge function

Loop out Composite: Yes

IN-OUT connections AUDIO

Audio Line IN: Yes, 2 x RCA and 1 x 3.5mm mini jack

Audio Embedded Channel out: Yes, selectable

Speaker integrated: Yes, 2

Watts: 2 X 1 Watts

IN-OUT Connections Controls

GPI IN: Yes, RJ45

RS485/422 IN: Yes, RJ45

RS485/422 Loop out: Yes

RS232 IN: Yes, 9 Pin Sub D

Service Port: Yes, internal

Supported Signal Formats

Note for SMPTE/ITU Definitions: SMPTE or ITU definitions have servile specification in-between, like SMPTE 274 for Interlace Frames rates for example, this is not reflecting here! Please ask for details Signal Spec´s and Frame-rate supports

HDSDI/SD Signal Formats SMPTE-424M: Yes

HDSDI/SD Signal Formats SMPTE-425M-A/B: Yes

HDSDI/SD Signal Formatss BTA S-004C: Yes

HDSDI/SD Signal Format SMPTE-292M: Yes

HDSDI/SD Signal Formats DUAL-LINK or 3G SMPTE-372M-2002: Yes

HDSDI/SD Signal Formats ITU-R BT656: Yes

SDI SIgnal Formats SMPTE-259M: Yes

Signal Format ITU BT601-7: Yes

Signal Format SMPTE-299M: Yes

Signal Format SMPTE-272M: Yes

HDMI Format 1080P plus: up to 1080P

Composite: Yes, PAL/NTSC

Dedicate Functions

SDI Timecode: Yes, LTC, VITC, and D-VITC

R/G/B/Mono: Yes

H/V delay: Yes, only with special upgrade

Field/Frame mode: Yes, Field 1 / Field 2 / Reverse only with special upgrade

Scan Modes: Progressive,/Field Cinema 3:2 pull down / 1:1

Safety area markers: Yes, 80% to 100%

Center Marker: Yes

Scale Markers: Yes, 4:3/16:9/14:9/13:9/2.35:1/1.85:1/1.75:11.66:1

Area Marker Visibility: OFF,Line,Half,Half+Line

Tally via GPI: Yes

Tally Multi-Color: Yes

Low Latency Mode: Yes

Screen saver: Yes

Environment Power Save function: Yes

TSL UMD/IMD Support via:: Yes, Serial RS485

Function Keys: 2

Direct Input Channel buttons: Yes

Auto Aspect: Yes, Analogue and Digital sources

OPERATION KEY-LOCK: Yes

Operation LED Dimmer (Buttons): Yes

Direct Brightness/Contrast/Color control: Yes

Measurement and indication Tools

Waveform: Yes

Waveform enlargement: Yes

Waveform subs: R/G/B, Y/PB/PR, and Y/CB/CR. peak brightness with Over-level function.

Vector-scope: Yes

Vector-scope enlargement: Yes

Vector-scope subs: video,component, SDI (SD/HD) input signals.

Histogram: Yes

Audio Level Meter: Yes

Audio Level Meter Channels: 16

Audio Level Meter subs: Over Level Indication plus Lissajous Meter

Calibration and Color settings

Preset Color Temperature 9300K: Yes

Preset Color Temperature 6500K: Yes

Preset Color Temperature 5600K: Yes

Preset Color Temperature USER:: Yes

Manual calibration of Color Temperature (gain or/and cut-off): Yes

External Auto-Calibration (Software Tool): Yes

External Colormetrie Sensor needed: Yes, Minolta CA-210, X-Rite i1 Display 2, i1 Display 3/Pro (OEM version), Jeti Specbos (with FTDI driver v.2.8.24), Datacolor Spyder4

Calibration Hints:: Free Calibration Software in our Support area

Gamma Levels: 2.2/ ,2.35,/2.45,/2.6

Adjustable Back-Light: Yes

Dedicate Timing Information

Lip-sync. Processing time:: less 1 Frame

MTBF Life-Times

MTBF Notes:: MTBF Data are based on theoretical Mathematics-calculations, the values therefore are just a guess of reference life time estimation.

MTBF Panel (Back-light) :: 30000 hours

MTBF electrical:: 0 hours

Power and Enviroment Spec´s

Power AC: Yes

Power DC: Yes, 12V-17V

DC Connector Type:: 4 PIN XLR

Power consumption: 0.39 Ampere /AC 5 A DC

Operation Temperature in Celsius: 5C to 35C

Operation Humidity:(Non-Condensing): 20% to 80%

Storage Temperature in Celsius: -20C to 60C

Storage Humidity (Non-Condensing): 10% to 90%

Mechanical Informations

VESA Mount: Yes

VESA Format: 100x100

VESA Screw Type in Metric: M4x4mm

Rack-mount into 19" Format: Yes, optional

Include Package

AC Power cord: Yes

Others: CD Rom detail instructions , Power cord Holder, srews

Instruction Doc:: Yes

General Editing Note

General Note: Simulated pictures.The values for weight and dimensions are approximate .E.&O.E. Design and specifications subject to change without notice.

Accessories

RAK21LCDG2

Especially designed to securely mount the monitor to a standard 19-inch rack.

CAD 299.99