DT-V17G2

Panel Specifications

Panel size (diagonal in inch)

16.5

Panel resolution

1920 X 1080 Pixels

Panel Aspect Ratio

16 to 9

Panel Type LCD

Yes

Panel Modulation IPS

Yes

Back-light LED

Yes

Brightness in cd/m²

300

Panel Bit depth:

8

Image Processing Bit depth

10

Panel response times in ms

8 ms

Viewing angle H/V

H 178 / V 178

Contrast Ratio

1500:1

IN-OUT´s Connections VIDEO

Input HDSDI

Yes, 3G

Number of HDSDI Inputs

2

HDSDI DUAL LINK

Yes

Input HDMI

Yes

Number of HDMI Inputs

1

HDMI HDCP

Yes

Input YUV

Yes, 3 x BNC

Input Composite

Yes

Numbers of Composite Inputs

2

Loop out HDSDI

Yes, 2 with bridge function

Loop out Composite

Yes

IN-OUT connections AUDIO

Audio Line IN

Yes, 2 x RCA and 1 x 3.5mm mini jack

Audio Embedded Channel out

Yes, selectable

Speaker integrated

Yes, 2

Watts

2 X 1 Watts

IN-OUT Connections Controls

GPI IN

Yes, RJ45

RS485/422 IN

Yes, RJ45

RS485/422 Loop out

Yes

RS232 IN

Yes, 9 Pin Sub D

Service Port

Yes, internal

Supported Signal Formats

Note for SMPTE/ITU Definitions

SMPTE or ITU definitions have servile specification in-between, like SMPTE 274 for Interlace Frames rates for example, this is not reflecting here! Please ask for details Signal Spec´s and Frame-rate supports

HDSDI/SD Signal Formats SMPTE-424M

Yes

HDSDI/SD Signal Formats SMPTE-425M-A/B

Yes

HDSDI/SD Signal Formatss BTA S-004C

Yes

HDSDI/SD Signal Format SMPTE-292M

Yes

HDSDI/SD Signal Formats DUAL-LINK or 3G SMPTE-372M-2002

Yes

HDSDI/SD Signal Formats ITU-R BT656

Yes

SDI SIgnal Formats SMPTE-259M

Yes

Signal Format ITU BT601-7

Yes

Signal Format SMPTE-299M

Yes

Signal Format SMPTE-272M

Yes

HDMI Format 1080P plus

up to 1080P

Composite

Yes, PAL/NTSC

Dedicate Functions

SDI Timecode

Yes, LTC, VITC, and D-VITC

R/G/B/Mono

Yes

H/V delay

Yes, only with special upgrade

Field/Frame mode

Yes, Field 1 / Field 2 / Reverse only with special upgrade

Scan Modes

Progressive,/Field Cinema 3:2 pull down / 1:1

Safety area markers

Yes, 80% to 100%

Center Marker

Yes

Scale Markers

Yes, 4:3/16:9/14:9/13:9/2.35:1/1.85:1/1.75:11.66:1

Area Marker Visibility

OFF,Line,Half,Half+Line

Tally via GPI

Yes

Tally Multi-Color

Yes

Low Latency Mode

Yes

Screen saver

Yes

Environment Power Save function

Yes

TSL UMD/IMD Support via:

Yes, Serial RS485

Function Keys

2

Direct Input Channel buttons

Yes

Auto Aspect

Yes, Analogue and Digital sources

OPERATION KEY-LOCK

Yes

Operation LED Dimmer (Buttons)

Yes

Direct Brightness/Contrast/Color control

Yes

Measurement and indication Tools

Waveform

Yes

Waveform enlargement

Yes

Waveform subs

R/G/B, Y/PB/PR, and Y/CB/CR. peak brightness with Over-level function.

Vector-scope

Yes

Vector-scope enlargement

Yes

Vector-scope subs

video,component, SDI (SD/HD) input signals.

Histogram

Yes

Audio Level Meter

Yes

Audio Level Meter Channels

16

Audio Level Meter subs

Over Level Indication plus Lissajous Meter

Calibration and Color settings

Preset Color Temperature 9300K

Yes

Preset Color Temperature 6500K

Yes

Preset Color Temperature 5600K

Yes

Preset Color Temperature USER:

Yes

Manual calibration of Color Temperature (gain or/and cut-off)

Yes

External Auto-Calibration (Software Tool)

Yes

External Colormetrie Sensor needed

Yes, Minolta CA-210, X-Rite i1 Display 2, i1 Display 3/Pro (OEM version), Jeti Specbos (with FTDI driver v.2.8.24), Datacolor Spyder4

Calibration Hints:

Free Calibration Software in our Support area

Gamma Levels

2.2/ ,2.35,/2.45,/2.6

Adjustable Back-Light

Yes

Dedicate Timing Information

Lip-sync. Processing time:

less 1 Frame

MTBF Life-Times

MTBF Notes:

MTBF Data are based on theoretical Mathematics-calculations, the values therefore are just a guess of reference life time estimation.

MTBF Panel (Back-light) :

30000 hours

MTBF electrical:

0 hours

Power and Enviroment Spec´s

Power AC

Yes

Power DC

Yes, 12V-17V

DC Connector Type:

4 PIN XLR

Power consumption

0.3 Ampere /AC 5 A DC

Operation Temperature in Celsius

5C to 35C

Operation Humidity:(Non-Condensing)

20% to 80%

Storage Temperature in Celsius

-20C to 60C

Storage Humidity (Non-Condensing)

10% to 90%

Mechanical Informations

VESA Mount

Yes

VESA Format

100x100

VESA Screw Type in Metric

M4x4mm

Rack-mount into 19" Format

Yes, optional

Dimensions W x H x D in mm

W:430mm / H:309mm / D:102mm

Weight (without stand) in Kg:

5.8Kg

Weight in Kg:

8.2Kg

Include Package

AC Power cord

Yes

Others

CD Rom detail instructions , Power cord Holder, srews

Instruction Doc:

Yes

General Editing Note

General Note

Simulated pictures.The values for weight and dimensions are approximate .E.&O.E. Design and specifications subject to change without notice.