The DT-V21G2 is a versatile LCD monitor suitable for field, studio and broadcast use. The monitor is fully capable of displaying 2048 x 1080/24p (DCI 2K) signal.
Warranty
Labor: 1 year
Parts : 1 year
21-inch class (21.5-inch view able) IPS panel with 16.7 million color reproduction
High 1500:1 Contrast Ratio
Full HD resolution: 1920 x 1080 pixels
Fully capable of displaying 2048 x 1080/24p (DCI 2K) signal
Built-in Histogram, Waveform, Vector Scope, Zebra
Built-in Audio Level Meter up to 16ch
Lissajous audio metering
3 Gamma Preset Modes
Wide array of markers and indicators
Two 3G-SDI & Dual Link inputs
IMD (in monitor display)
Optimized I-P conversion
Supports the EIA/CEA-708 and EIA/CEA-608 SDI closed captioning standards
Color Temperature settings (9,300K, 6,500K, 5,600K or User mode)
IP modes: Normal, Field, and Cinema (24p)
Pixel-by-pixel (1:1) display
Time code display (SDI)
Built-in stereo speaker
Tiltable stand with 2-way installation capability
Carrying handle
Technical Specifications
Technical Specifications
Panel Specifications
Panel size (diagonal in inch)
21.5
Panel resolution
1920 X 1080 Pixels
Panel Aspect Ratio
16 to 9
Panel Type LCD
Yes
Panel Modulation IPS
Yes
Back-light LED
Yes
Brightness in cd/m²
300
Panel Bit depth:
8
Image Processing Bit depth
10
Panel response times in ms
8 ms
Viewing angle H/V
H 178 / V 178
Contrast Ratio
1500:1
IN-OUT´s Connections VIDEO
Input HDSDI
Yes, 3G
Number of HDSDI Inputs
2
HDSDI DUAL LINK
Yes
Input HDMI
Yes
Number of HDMI Inputs
1
HDMI HDCP
Yes
Input YUV
Yes, 3 x BNC
Input Composite
Yes
Numbers of Composite Inputs
2
Loop out HDSDI
Yes, 2 with bridge function
Loop out Composite
Yes
IN-OUT connections AUDIO
Audio Line IN
Yes, 2 x RCA and 1 x 3.5mm mini jack
Audio Embedded Channel out
Yes, selectable
Speaker integrated
Yes, 2
Watts
2 X 1 Watts
IN-OUT Connections Controls
GPI IN
Yes, RJ45
RS485/422 IN
Yes, RJ45
RS485/422 Loop out
Yes
RS232 IN
Yes, 9 Pin Sub D
Service Port
Yes, internal
Supported Signal Formats
Note for SMPTE/ITU Definitions
SMPTE or ITU definitions have servile specification in-between, like SMPTE 274 for Interlace Frames rates for example, this is not reflecting here! Please ask for details Signal Spec´s and Frame-rate supports
HDSDI/SD Signal Formats SMPTE-424M
Yes
HDSDI/SD Signal Formats SMPTE-425M-A/B
Yes
HDSDI/SD Signal Formatss BTA S-004C
Yes
HDSDI/SD Signal Format SMPTE-292M
Yes
HDSDI/SD Signal Formats DUAL-LINK or 3G SMPTE-372M-2002
Yes
HDSDI/SD Signal Formats ITU-R BT656
Yes
SDI SIgnal Formats SMPTE-259M
Yes
Signal Format ITU BT601-7
Yes
Signal Format SMPTE-299M
Yes
Signal Format SMPTE-272M
Yes
HDMI Format 1080P plus
up to 1080P
Composite
Yes, PAL/NTSC
Dedicate Functions
SDI Timecode
Yes, LTC, VITC, and D-VITC
R/G/B/Mono
Yes
H/V delay
Yes, only with special upgrade
Field/Frame mode
Yes, Field 1 / Field 2 / Reverse only with special upgrade